Post by Ismail AbdulAzeez on Sept 28, 2019 12:55:08 GMT 1
Locate Suitable Farmland For Planting your Yam
Yams prefer growing in an upland and they should be planted in a well-drained field. Optimum yields are obtained from sandy loam and silt loam soil although acceptable yields are also obtained from clay loam soils, particularly those high in organic matter. While some yams does relatively well on stony soil, it is however not advisable to plant yam on stony hard soil.
Forest lands in most tropical region offers ideal environment for growing yam both in soil quality and climate conditions.
Prepare The Land
Properly clear the bush and burn the grasses with fire at the appropriate time. Yam is best planted within the months of February and April when the rainy season is just beginning. These are the best periods for land preparation.
After the bush had been cleared, make hips of loose soil of about one meter in height and one meters apart. Ridged bed types are also good for yam planting. When the latter is used, the ridges should be constructed one meters apart. In the case of sloping or rolling fields, construction of ridges should follow the contour to minimize soil erosion. This is essential in yam farming.
While making the ridges, it is important to remove any hard objects that could hinder the growth of the yam tuber.
Setts are whole tubers or tuber that is cut in pieces used for planting. If the tuber is small, it can be planted whole, but if it is big, it has to be cut in pieces to the size of 60g to 100g. As a rule, the bigger the sett used, the higher is the expected yield but shouldn’t be too big, else, you will be wasting resources.
Setts should be taken from healthy tubers of healthy plants. Appropriate sett size are not sliced while larger tubers are sliced into the desired sett size so that each sett has sufficient skin surface area. Thus, four types of setts are obtained and are named according to their positions on the tuber as follows: head setts, middle setts and tail setts for the tuber pieces and whole setts for the whole tubers.
Cut sides of the setts are treated with ash or with fungicide and air dried. After air drying, setts are either pre-sprouted or planted directly.
The usual planting time for white yam is March to April, depending on the time the tuber dormancy is broken, as indicated by the sprouting of tubers under storage and upon start of rain in a particular area. This means that you have to start the pre-sprouting process well ahead of the planting time, at least for 3 weeks
Like I said before, the distance between the planted yam should be 1m x 1m and at a depth of about 10cm. When planting coincides with a dry spell, setts are planted in any orientation about 15 cm deep if the field will not be mulched. About 20,000 to 27,778 setts are needed for one hectare of farmland.
Pre-sprouted setts. Setts are usually planted at the start of rain if the field cannot be irrigated or will not be mulched. The same planting distance and depth for non-pre-sprouted setts are used. When planting, setts should be oriented so that sprouts are up. To achieve this, the cut surface has to face the ground.
In staggered planting, the field is divided into four up to six sections – a section for a batch of setts ready for planting. The size of each section and the time each section is prepared is guided by the rate of sprouting of setts.
Mulching The Ridges
In order to reduce soil temperature, conserve soil moisture and suppress weed growth, it is preferable to mulch the field where the yams are planted. Dry coconut fronds, corn stalks, rice straw and other similar materials may be used as mulch. If rice straw or similar material that rot readily is used, the mulch is made thick (about 10 cm) so that it will not rot completely within four or five months.
For yam farming and to further to protect the soil from excessive loose of moisture, mulching tends to add some nutrient to the soil from the decaying materials used.
The number of times a yam farm needs to be weeded depends on the use of pre-sprouted setts, the application of mulch and the rate of weed growth. If non-pre-sprouted setts are used and the field is not mulched, two to three weeding operations are needed before the yam canopy covers the space between rows to partially suppress weed growth. If pre-sprouted setts are used and the field is mulched, at most only two weedings performed about two months apart are needed.
Handtools are the only method we recommend. Use of other methods such as animal powered plows are dangerous to the plans as the vines may get damaged in the process. Use of herbicides may be acceptable in some areas.
Replanting (Replacing Dead Yams)
Some amount of sett mortality can be expected, particularly in while Guinea yam when non-presprouted setts are used for planting. Thus replanting is done, usually about two months after the original planting.
Hills with no sprouts are checked to see if there are rotten setts which should be removed and replaced with new ones. Unsprouted setts that did not rot should not be replaced because they still can produce sprouts later on.
Staking The Yam Vines
Plants are staked before vines start crawling on the ground. The recommended stake length is five to ten meters and a stake to every plant. Bamboo poles are the most desirable staking material, similar material that can support the yam vines for at least seven months can be used as stakes. There are various methods of staking. Three of the more popular ones are as follows:
Trellis method . This stake setup is not very stable and requires more materials to support the stakes (posts and tie wire). However, weeding and hilling up operations using animal-drawn implements can be done easily under this setup.
Modified trellis method . With this method, ground spaces under the stake arch need not be weeded as the foliage becomes dense. Also, stakes formed in this manner provide stable support. However, weeding and hilling up operations that utilize animal-drawn implements cannot be done under the arches.
Pyramid method . This staking method has the advantages and disadvantages of the modified trellis method. In addition, it requires fewer, though sturdier, materials for stake construction and requires lesser amount of labor to construct. On the other hand, it has an additional disadvantage because yams grown under this method usually yield lower than those grown under the modified trellis method of yam farming.
Training The Vines
The water yam (Dioscorea alata) vine twines to the right while that of white Guinea yam (Dioscorea rotundata) twines to the left. When vines start crawling on the ground, they are trained to climb their respective stakes. They are trained again when long branches start crossing the rows or when weeding operation is about to be done.
A hectare of water yam is able to remove about 128 kg nitrogen, 17 kg phosphorous and 162 kg potassium from the soil. This represents more or less its fertilizer requirements. In the case of white yam, no information is available regarding the amount of nutrients it can remove from the soil. However, like other yams, its fertilizer requirements should be similar to that of water yam.
The level of soil fertility in the field and the amount of fertilizer that need to be added can be determined by submitting the soil samples to the any agricultural institute or to IITA for analysis. The assistance of the local Farm Management Technician should be sought regarding this.
Covering Exposed Tubers
As tubers elongate rapidly towards the end of the growing period of the plants, some tubers tend to heave, thereby causing them to be exposed to the sun. Heavy rains also expose the tubers. Exposed tubers should be covered with soil to prevent them from greening. Greening could make it to become inedible in some cases.
Harvesting Time And Method
Yams are ready for harvest when its foliage is already yellowing or drying up. The yellowing or drying up period of the foliage usually starts in late November and lasts until February the following year. Tubers, especially those intended to be used as setts for next season’s planting are harvested at the later part of the period. Tubers intended for consumption or for the market are sometimes harvested earlier, even before foliage yellowing sets in.
A hoe or a similar handtool is used to dig around the tuber to loosen it from the soil. Then the tuber is lifted and clinging soil particles are removed. The vine is cut at the base to complete the harvesting.
For sandy soil, sturdy stick sharpened at one end is sometimes used to dig out the tuber. For clay soil and for varieties with deeply buried tubers, other specialized harvesters like shovel may be used. Whatever tool is to be used to harvest the tubers, it is important that care should be exercised so as not to injure yam while digging as that may reduce the market value and hasten it’s decay.
After tubers are cleaned, they are collected and placed in rattan baskets or bamboo or wooden crates lined with soft materials such as banana leaves, paper or grass straw. Healthy and diseased tubers are placed in separate containers. The tubers are arranged in the container in two to four layers, depending on tuber size, and a soft material that can serve as cushion is placed between layers and in the spaces between tubers in a layer. The container is then covered with paper or banana leaves and a string net is woven over the mouth of the container if the tubers are to be transported immediately to the market. No cover is provided for the container if the tubers are to be transported to a nearby storage place.
When you are done harvesting, take your product to the market and make sales. Yam farming is lucrative as yam is a very important commodity in the market and sells very fast.